Every one facing same problem in our car at rainy session visibility plur its big problem even this is the reason for 70% accident below i mention some tips how to improve your car visibility if my tip helps you kindly follow my blog
Rain-X – coating your windows with Rain-X or another water repellent coating
meant for glass will increase many fold your vision when it is raining and make your
windshield wipers much more effective. Water will literally fly off your windshield.
As an alternative to a dedicated water repellent glass coating, many use a sealant on
their glass. This has nearly the same effect, but has been known to cause the window
to fog in some weather conditions. It is not recommended that you wax your glass as
wax is not as transparent (a/k/a “optically true”) as sealants.
Anti-Braking System is a safety system that allows the wheels on a motor vehicle to continue interacting tractively with the road surface as directed by driver steering inputs while braking, preventing the wheels from locking up (that is, ceasing rotation) and therefore
Abs break by technical world
avoiding skidding. A skidding wheel (where the tire contact patch is sliding relative to the road) has less traction than a non-skidding wheel. If you have been stuck on ice, you know that if your wheels are spinning you have no traction. This is because the contact patch is sliding relative to the ice. By keeping the wheels from skidding while you slow down, anti-lock brakes benefit you in two ways: You’ll stop faster, and you’ll be able to steer while you stop.
There are four main components to an ABS system:
a) Speed sensors
b) Pump
c) Valves
d) Controller
Speed Sensors– The anti-lock braking system needs some way of knowing when a wheel is about to lock up. The speed sensors, which are located at each wheel, or in some cases in the differential, provide this information.
Valves– There is a valve in the brake line of each brake controlled by the ABS. On some systems, the valve has three positions:
· In position one, the valve is open; pressure from the master cylinder is passed right through to the brake.
· In position two, the valve blocks the line, isolating that brake from the master cylinder. This prevents the pressure from rising further should the driver push the brake pedal harder.
· In position three, the valve releases some of the pressure from the brake.
Pump– Since the valve is able to release pressure from the brakes, there has to be some way to put that pressure back. That is what the pump does; when a valve reduces the pressure in a line, the pump is there to get the pressure back up.
Controller– The controller is a computer in the car. It watches the speed sensors and controls the valves.
An ABS generally offers improved vehicle control and decreases stopping distances on dry and slippery surfaces for many drivers; however, on loose surfaces like gravel or snow-covered pavement, an ABS can significantly increase braking distance, although still improving vehicle control.
Stainless Steel is defined as that steel which when correctly heat treated and finished, resists oxidation and corrosive attack from most-corrosive media. The different types of stainless steels are as follows:
1. Martensitic stainless steel. The chromium steels containing 12 to 14% chromium and 0.12 to 0.35% carbon is called martensitic stainless steel, as they possess martensitic structure. These steels are magnetic and may be hardened by suitable heat treatment and the hardness obtainable depends upon the carbon content. These steels can be easily welded and machined.
2. Ferritic stainless steel. The steels containing greater amount of chromium (from 16 to 18%) and about 0.12% carbon are called ferritic stainless steels. These steels have better corrosion resistant property than martensitic stainless steels.
3. Austenitic stainless steel. The steel containing high content of both chromium and nickel are called austenitic stainless steels. The most widely used steel contains 18% chromium and 8% nickel. Such a steel is commonly known as 18/8 steel. These steels are non-magnetic and possesses greatest resistance to corrosion and good mechanical properties at elevated temperature.
The process of providing any arrangement, which will keep the engine speed constant (according to the changing load conditions) is known as governing of I.C. engines. Though there are many methods for the governing of I.C. engines, yet the following are important :
1. Hit and miss governing. In this system of governing, whenever the engine starts running at higher speed (due to decreased load), some explosions are omitted or missed. This is done with the help of a centrifugal governor. This method of governing is widely used for I. C. engines of smaller capacity or gas engines.
2. Qualitative governing. In this system of governing, a control valve is fitted in the fuel delivery pipe, which controls the quantity of fuel to be mixed in the charge. The movement of control valve is regulated by the centrifugal governor through rack and pinion arrangement.
3. Quantitative governing. In this system of goverliing, the quality of charge (i.e. air-fuel ratio of the mixture) is kept constant. But the quantity of mixture supplied to the engine cylinder is varied by means of a throttle valve which is regulated by the centrifugal governor through rack and pinion arrangement.
4. Combination system of governing. In this system of governing, the qualitative and quantitative methods of governing are combined together.
Black exhaust smoke can appear when the vehicle is burning too much fuel. This could be caused by a clogged air filter, malfunctioning fuel injection system, a blocked manifold, or a variety of other issues. A clogged air filter won't hurt your gas mileage thanks to today’s automotive technology, says Consumer Reports, but you’ll pay for it with poor performance. Have your vehicle checked out by a technician to see why your vehicle is burning more fuel than usual.
Detonation or knocking in I.C. Engines – The loud pulsating noise heard within the engine cylinder of an I.C. engine is known as detonation (also called knocking or inking). It is caused due to the propagation of a high speed pressure wave created by the auto-ignition of end portion of unburnt fuel. The blow of this pressure wave may be of sufficient strength to break the piston. Thus, the detonation is harmful to the engine and must be avoided. The following are certain factors which causes detonation:
1. The shape of the combustion chamber,
2. The relative position of the sparking plugs in case of petrol engines,
3. The chemical nature of the fuel,
4. The initial temperature and pressure of the fuel, and
5. The rate of combustion of that portion of the fuel which is the first to ignite. This portion of the fuel in heating up, compresses the remaining unburnt fuel, thus producing the conditions for auto-ignition to occur.
The detonation in petrol engines can be suppressed or reduced by the addition of a small amount of lead ethide or ethyl fluid to the fuel. This is called doping.
The following are the chief effects due to detonation:
1. A loud pulsating noise which may be accompanied by a vibration of the engine.
2. An increase in the heat lost to the surface of the combustion chamber.
👆
